Swing Gate Post 100x80 (3.94''x3.15'')
- it is used when there are no concrete columns and it is necessary to concrete the metal post in the ground.
- the post must be at least 800mm higher than the height of the gate it supports.
- has welded metal plates on which the adjustable hinge is fixed.
- after welding, the post is subjected to hot-dip galvanizing process.
- after galvanizing, the post is powder coated in electrostatic field and treated in the curing oven at 392°F.
Additional Swing Gate Posts 100x80 (3.94''x3.15'')
- the additional post is used only for pathway gates
- it is used when concrete columns are not present and it is necessary to concrete the metal post in the ground.
- the post must be at least 800 mm higher than the height of the gate it supports.
- has no metal plates welded to it .
- the post is subjected to hot-dip galvanizing process
- after galvanizing, the post is powder coated in electrostatic field and treated in the curing oven at 392°F.
- plastic plugs included.
Swing Gate Post 80x40 (3.15''x1.57'')
- it is used when there are no concrete columns and it is necessary to concrete the metal post in the ground.
- the post must be at least 800mm higher than the height of the gate it supports.
- has welded metal plates on which the adjustable hinge is fixed.
- after welding, the post is subjected to hot-dip galvanizing process.
- after galvanizing, the post is powder coated in electrostatic field and treated in the curing oven at 392°F.
Additional Swing Gate Posts 80x40 (3.15''x1.57'')
- the additional post is used only for pathway gates
- it is used when there are concrete columns.
- has special holes perforated for fixing it to concrete with metalic anchors.
- has no metal plates welded to it .
- the post is subjected to hot-dip galvanizing process
- after galvanizing, the post is powder coated in electrostatic field and treated in the curing oven at 392°F.
- plastic plugs included.